New Shure-Squirt low-cost, full-featured hot melt hand gun system

	120 VAC
	Teflon-coated reservoir
	Individually-controlled heat zones
	Extrusion or spray handgun

Shure-Squirt literature

New Shure-Glue / MELTON MPUR Series Slot Coat PUR Hot-Melt Applicators

The MPUR-series hot-melt slot coat applicators are designed specifically for use with polyurethane adhesives. MPUR sealed systems offer considerably reduced maintenance and associated labor costs. Zero-cavity module design prevents premature adhesive cure and eliminates adhesive buildup. Standard coating thickness range from 0.30mm to 1.5mm with pattern widths up to 720mm

Shure-Glue/Melton MPUR literature

Shure-Glue/Melton V-drum and V-pail unloaders are the solution for melting and pumping quantities of hot-melt adhesives. They are ideally suited for PUR applications. Units are designed for one or two hose outputs. Features include a finned, heated platen offering high melt rate with minimal adhesive degradation, variable speed gear pump with controlled, recirculating flow rate for consistent output, and a reliable analog control.

Visit our Hot-Melt Units page for specifications on the new drum and pail unloaders

D-SERIES GEAR PUMP EQUIPPED HOT MELT UNITS

Built for low- to medium-volume requirements, the D-series units are ideally suited for a range of packaging, paper converting, graphic arts, non-wovens and product assembly applications. All D-series units feature a positive displacement motor-driven gear pump that offers a continuous pulse-free output and can be used with spray, ribbon coating, direct contact and high-speed jetting adhesive dispensing guns. The D-series hot melt applicator delivers the flexibility, performance and durability packaging professionals demand in their adhesive applications. Solid-state controls, accurate RTD temperature sensors and thermostatic temperature control optimize system performance. They can easily be adapted to variable-speed applications.

Visit our Hot-Melt Units page for specifications on the new D-series units.

NCP-16 HOT-MELT PISTON PUMP

Dual-acting pump provides constant adhesive pressure for higher-volume applications.

Self-contained pump shifter reduces potential stalling and provides maintenance-free operation.Stainless-steel air valve not sensitive to corrosion from plant air.

Output ratio: 16:1
Maximum pump rate: 72 lb/hr (32 kg/hr)
Operating air pressure: 10–70 psi (0.7–4.8 bar)
Hydraulic pressure: 160–1,120 psi (11–76 bar)
Viscosity range: 1,000–20,000 cps

Shure-Glue Pump literature