D-SERIES, from 12 lb to 40 lb capacity Gear Pump Equipped Melt Units

Built for low- to medium-volume requirements, the D-series units are ideally suited for a range of packaging, paper converting, graphic arts, non-wovens and product assembly applications. All D-series units feature a positive displacement motor-driven gear pump that offers a continuous pulse-free output and can be used with spray, ribbon coating, direct contact and high-speed jetting adhesive dispensing guns. D-series hot melt applicator delivers the flexibility, performance and durability packaging professionals demand in their adhesive applications. Solid-state controls, accurate RTD temperature sensors and thermostatic temperature control optimize system performance. They can easily be adapted to variable-speed applications.

D-series units feature an easy-to-use touch pad with a bright vacuum-flourescent screen which allows operators to quickly setup system parameters and monitor system operation.

NC-SERIES, from 12 lb to 40 lb capacity Piston Pump Equipped Melt Units

From light-duty, low-volume applications to medium-speed, high-volume case sealing and product assembly, Shure-Glue / Melton's NC-series hot-melt applicators delivers the flexibility, performance and durability packaging professionals demand in their adhesive applications.

Solid-state controls, accurate RTD temperature sensors, and a thermostatic temperature control optimize system performance. The units feature a reliable air-operated piston pump and can operate with as many as four hoses/guns. For ease-of-use, a unified operator interface is used across an entire range of melt units.

NC-Series literature

V Series Gear Pump Hot-Melt Units

Shure-Glue / Melton's new V-Series hot-melt units offer a comprehensive selection of system components and support equipment for manufacturing operations. The V-Series is available in a range of tank sizes with melt rates to meet an assortment of application requirements. All units feature reliable cast-in tank heaters and Teflon®-coated reservoirs.V-Series system control
For optimum system performance, a self-tuning microprocessor PID controller independently controls16 heating zones. PID temperature control of all heated zones delivers superior accuracy and stability. An easy-to-use touch pad with a bright vacuum-fluorescent screen allows operators to quickly set up parameters and monitor operation.

V-Series gear pump
Each hot-melt unit is equipped with a reliable motor-driven gear pump. Multiple-pump configurations are available for complex applications. Positive-displacement gear pumps provide constant, uniform adhesive output and include variable-speed motors and drive ratios matched to each specific application. Gear pump units feature several relief valve options, ranging from the simple single-stage relief valve to more sophisticated pneumatic relief systems.

SHURE-MELT SYSTEM

The Shure-Melt hot-melt system is a reliable, "no frills" workhorse, ideally suited for packaging and product assembly tasks where low cost and simple operation are desired.

	Heat zones are individually adjustable, controlled by easy to use thermostats. No heat zones are slaved.
	Controls are inherently immune to all types of electrical noise.
	Indicator lamps monitor each heat zone.Simple setup and operation
	Two hose ports. Hoses are available in 8 ft (2.4m), 12 ft (3.7m) and 16 ft (4.9m) lengths.
	Jetting hand guns, spiral spray handguns and industry standard modular automatic valves are available.
	Over-pressure and over-temperature protection.
	Programming plugs allow easy field configuration of melt unit for either 120V or 240V operation.
	Self-programming peripherals automatically configure for 120V or 240V operation when connected to unit.

New Shure-Squirt low-cost, full-featured hot melt hand gun system

	120 VAC
	Teflon-coated reservoir
	Individually-controlled heat zones
	Extrusion or spray handgun

Shure-Squirt literature

NEW! Shure-Glue/Melton C-Series hot-melt units

	Air-operated piston pump.
	2, 4 or 6 hose/gun outlets
	4, 8, 16, 30, adn 50 liter tank sizes

C-Series literature

NEW! Shure-Glue/Melton M-Series

	High-capacity, motor-driven gear pump.
	15, 30, 65, 120 and 170 liter tank sizes
	Analog control/PLC interface

M-Series literature

NEW! Shure-Glue/Melton B-Series

	Suited for PUR adhesives
	Variable-speed gear pump
	24 and 42 liter tank sizes

B-Series literature

NEW! Hot-melt drum and pail unloaders -
Shure-Glue/Melton Series

Shure-Glue/Melton V-drum and V-pail unloaders are the solution for melting and pumping quantities of hot-melt adhesives. They are ideally suited for PUR applications. Units are designed for one or two hose outputs. Features include a finned, heated platen offering high melt rate with minimal adhesive degradation, variable speed gear pump with controlled, recirculating flow rate for consistent output, and a reliable analog control.

V-Drum and V-Pail unloaders literature